# Email campaigns: write, send and track

> Write one email or push message, choose who gets it, send yourself a copy, then send or schedule it. Read the report on opens, clicks and orders.

Source: https://docs.personacart.com/growth/campaigns

In short: {"Write one email or push message, choose who gets it, send yourself a copy, then send or schedule it. Read the report on opens, clicks and orders."}

- A campaign is **one email to many people on your list**.
- You pick an idea (or write from scratch), choose who gets it, send yourself a copy to look at, then send it now or schedule it.
- After it goes out, the same row becomes a report: how many were delivered, opened and clicked, and how many orders came from it.

Video: Emails to your list: start from an idea and manage drafts (https://www.youtube.com/watch?v=ibZxFeyCVbM)

A campaign is sent on purpose by you. For messages that send themselves when something happens (a welcome email, a cart reminder), use [Automations](/growth/automations).

1. Open **Growth → Campaigns**. Press **Use this idea** on a card under **Ideas to start from**, or press **Write an email** and choose **Email Campaign**.
3. Choose who gets it, check the words, and press **Send test to me** to send yourself a copy.
4. Press **Review & send**, then **Send to N people**.

## Where to find it

Sidebar → GROWTH → Campaigns. The editor is at `/growth/campaigns/create`, and a sent campaign's results open from its row.

You need the permission to manage campaigns. A trial store can send up to 3 campaigns and 1,000 emails. Paid plans have higher limits.

## Use the Campaigns list

### Start a campaign

The title is **Emails to your list**. Under it, one plain line gives the facts: "N campaigns sent" (or "No campaign sent yet") and "N people can get your emails". Three buttons sit on the right:

- **Send frequency** opens the per-person limit (see below).
- **Export** downloads all your campaigns as a CSV file with their numbers.
- **Write an email** starts a new campaign. It first asks **What do you want to send?** with two cards:
  - **Email Campaign**: "A newsletter, an offer or news for your customers." It says "Ready to send — no setup needed", or the name of a connected provider.
  - **Push notification**: "A short alert on the phone or computer of customers who turned on notifications for your store." If no customer has turned notifications on yet, this card is greyed out and says "No customers have turned on notifications yet — push campaigns reach nobody until they do."

### Pick an idea to start from

- Up to four ready-made cards. Only the audience and at-risk counts come from your store. The subject and text are general starting points that you edit.
- Each has **Preview** (the subject and text, with the audience on a "To:" line) and **Use this idea**, which opens the editor with the subject and text already written.
- The **Announce** idea also adds a **Product** block. Press **Choose a product** on it, or **Review & send** will ask you to pick one first.
- Next to them, **Pick for me** opens the first one.

| Idea | What it is | Shown when |
|---|---|---|
| **Win back** | "We miss you" to customers who are drifting away. Adds your live code when you have one. | Some customers are at risk |
| **Announce** | Tell people about a product. | Always |
| **Newsletter** | Your news for this month. | Always |
| **Sale** | Share a discount code. | You have a live discount code |

### Ask Pie to write it

Type a sentence such as "Remind last month's buyers about the spring camp" and press **Write it for me**. The editor opens in AI mode with your sentence as the brief. You review the draft before anyone gets it.

### Fix what needs you

Cards appear only when something is waiting:

- **Unfinished drafts**: "N drafts are older than 7 days". Button: **Open the oldest**.
- **Paused after their date**: "N campaigns are paused after their date". Button: **Decide**.

### Win back quiet readers

- When some people got at least 3 of your emails in the last 6 months and opened none, a card says so ("N people have not opened your emails in 6 months") and explains that mailing them again can hurt your sender name.
- **Review win-back** opens a list of those people with a tick box each (**Keep mailing** this person).
- Then:

- **Write the win-back email** creates a draft for the people not ticked and opens it.
- **Stop mailing them** asks you to confirm ("Yes, stop mailing N") and adds them to the list of people your emails skip. A message offers **Undo**, which says "Back on your list." and removes only the people that step added.

The dialog tells you to write and send the win-back first: stopping the mail takes them out of that email.

### Find, filter and sort

- Search box: "Search N campaigns".
- **Filter** → **Show campaigns by state**: All, Draft, Scheduled, Sent, Paused. **Quick views**: Unfinished drafts, Best 10 by revenue, Not sent in 30 days.
- **Sort** by Updated, Created, Name, Status, Sent, or Scheduled (ascending or descending).
- **Views** lets you save a filter. See the [shared Growth controls](/growth#use-the-controls-every-growth-list-shares).

### Read your campaigns

Each row shows the name, a status chip, and one line of facts. Push campaigns carry a **Push** chip.

| Status | Meaning |
|---|---|
| Draft | Not sent. The row's button is **Keep writing** and the line says "Not sent yet · last edited …". |
| Scheduled | Goes out at the shown time ("Goes out …"). Button: **Continue**. |
| Sending | Going out now ("Sending · 120 of 400", or "In queue · waiting to start"). |
| Live | An ongoing campaign that is active. |
| Sent | Finished. Button: **Report**. |
| Paused | Paused. You can resume it. |
| Cancelled | Stopped while it was sending. |
| Failed | Could not be sent. |

- For a campaign that went out, the line also shows how many were delivered (or sent), opened, clicked and, when there are orders, "N orders" with the revenue.
- A number that could not be measured is left out, never shown as 0.
- A small extra line may say "You copied this 3 weeks in a row.", "Copy of an earlier one: 41% opened.", or "38% opened, above your average of 31%."

**Actions** on a row (the **Actions** button):

- **Edit** (not yet sent) or **Report** (sent).
- **Duplicate** makes an editable copy.
- **Pause** / **Resume** for live campaigns. Pausing asks you to confirm, and says how many emails were already sent.
- **Unschedule** for a scheduled one: it goes back to your drafts and nothing is sent.
- **Stop sending** for one that is sending: a confirmation sheet explains what changes, who is told (nobody), and that those who already got it keep it. Because that cannot be undone, you tick "I understand. The N who got it keep it." first.
- **Delete** for a campaign that has not sent any email. A campaign that has mailed people stays, because its report and the unsubscribe links in sent emails depend on it.

**The bulk bar** (after ticking rows): **Duplicate**, **Pause** and **Export**. Pause only changes live campaigns and says "N left out because they were not in the right state" for the rest.

### Limit how often people are emailed

- **Send frequency** ("Emails per person per week") limits how often one person receives campaign emails.
- Set **Max emails** per **Days**.
- Anyone who already reached the limit in that window is skipped automatically on the next send, including automated campaigns.
- A new store starts at one email per person every 7 days.
- Set either number to 0 to turn the limit off; the dialog then says "Cap is OFF".
- The same setting lives in Settings → Send limit.

## Write and send a campaign

The editor autosaves: the top shows "Saving…" then "Saved", or "Not saved yet — changes save on their own". Nothing goes out until you press **Review & send** and confirm.

**Top bar.** Back arrow; the campaign **name** (type over "Untitled campaign"); a status chip (Draft or Scheduled); the save state.

- If your business postal address is missing, a red notice at the top says "Add your business address" and links to Settings → Business.
- The send button stays off until it is added, because marketing email legally requires a postal address.
- If you have used all your monthly campaign sends, a notice says so with **Upgrade plan**.

On a phone the page has two tabs, **Email** and **Settings**; on a computer they sit side by side.

The page is built from four parts: **Who gets this email?**, **Your words**, **Send a copy to yourself** and **When should it go?**.

- Your words sit on the left. The audience, sender, timing, test copy and **Review & send** sit in the panel on the right.
- A row of four small chips under the top bar (**Who**, **Words**, **Copy**, **When**) ticks off as you finish each part.

### Write your words

- **Subject line** (up to 200 characters). Highlighted details such as a first name are filled in for each person. A hint warns when a subject is too long for phones or contains a detail the email cannot fill in.
- **Preview text**: "The short line people see next to the subject in their inbox."
- The **email editor** with these blocks, added from the toolbar: **Heading**, **Text**, **Button** (button words and where it goes; links must start with https://).
  - **Product** (pick a product from your store; its name, price, picture and link go in).
  - **Coupon** (pick a live discount code or create a new one; the code and a link to your store go in).
  - **Line**.
  - Move blocks up or down, or remove them.
  - A **Product** or **Coupon** block with nothing picked blocks sending ("Pick a product or code for every Product and Coupon block first.").
- **Add a detail** puts in something filled in for each person, such as their first name. If a person has no first name, the email says "there". You can choose what shows when a detail is missing. A detail the email cannot fill in blocks sending until you remove it.
- **Look** chooses **Plain text** (a personal note with no logo or colours), **My store's default** design, or one of the designed styles, each with a small preview.
  - See [Email templates](/growth/email-templates).
  - The line "Your store's email design goes around this email" reminds you the design is added automatically, along with the unsubscribe link and your address.
- A live **Preview** on computer and phone widths shows the email as it will be sent.
- An older email written as code can be turned into blocks (**Turn into blocks**, with Undo) or edited as HTML (**Edit HTML**).

### Choose who gets this email

Choose one:

- **All subscribers**
- **Bought something**: **Any product** or **Specific products** (search and pick one or more)
- **At-risk** customers (shows "N customers · M can get email" when some have no usable address)
- **A tag or saved segment**: pick from **Tags** or **Saved segments**. If you have neither, it says to add them on the Customers page. Segments are the groups you build under [Segments](/commerce/segments).

Each choice shows how many people it reaches. If you started from one customer's page, the panel reads "Just this customer: name" and sends to nobody else. People who unsubscribed are always skipped.

### Sender

- Under **From name** (blank means your store's own sender, shown in grey), open **Sender** for **From email**, **Reply-To (optional)**, and **Send from**:
  - "PersonaCart (managed) — no setup needed" or one of your own providers.
  - Where replies go and how your emails look is covered in [Email templates](/growth/email-templates).

### Choose when it goes

- **Send now**, or **Schedule for later** with **Date and time to send**. Time is shown in your store's time zone. A scheduled time must be at least 5 minutes ahead.
- A **Suggested** time appears when there is enough history, with the reason ("Most of your customers open emails around then.").

### Send a copy to yourself

- **Send test to me** sends the email to your own address only, with sample details filled in.
- A chip shows **Not sent yet** or **Copy sent to you@…**.
- Always look at it once before everyone does; the confirmation box reminds you if you skipped it.

### Push notifications

- A push campaign has a simpler editor:
  - **Notification title** (the campaign's name), **Body text**, and **When someone taps it, open this page** (a full web address starting with https://; leave empty to open the home page of the site where they allowed notifications).
  - A preview and live character counts show as you type.

### Review and send

**Review & send** opens a check first: "Send “name” to N people now?" (or "Schedule … for N people on …?"). It lists:

- how many can get email,
- anyone skipped because they unsubscribed,
- anyone skipped because they were emailed within your send-frequency window, with a **Change send frequency** link,
- a warning if your plan's monthly limit would be passed, with **Upgrade plan**,
- "Nobody in this audience can receive email right now" when the audience is empty.

Press **Send to N people** (or **Schedule for N people**) to go, or **Back**.

:::warning[A sent email cannot be unsent]
Once an email is sent it cannot be unsent; people who already got it keep it. A scheduled campaign can be unscheduled from the list any time before it goes out.
:::

## Read the campaign report

Open a sent campaign with **Report** (or from **Actions → Report**). The page title is the campaign's name with "Sent `{date}`".

Buttons: **Back**, **Refresh** (while it is still sending, **Refresh now**), **Duplicate** and **Export** (a CSV of recipients).

- While sending, a progress line reads "N of M sent". A scheduled one says "Scheduled — waiting to send".
- **Orders from this email**: how many orders came within a number of days of a click, or "No orders yet".
- **Opened** and **Clicked** with their rates. Some email apps hide opens, so anyone who clicked a link is also counted as having opened it; the note under Opened says how many were counted that way.
- A line of totals: Sent, Delivered, Unsubscribed, Bounced.
- If tracking was not active for that send, a note says rates will appear on the next send, rather than showing a misleading 0%. If a campaign reached nobody, a note says to duplicate it and choose a different audience.
- **Recipients**: a searchable table with Email, Status (Waiting, Sending, Sent, Delivered, Bounced, Failed, Skipped), Opens, Clicks, Sent At, and Error.
  - The error column says plainly why a person was skipped, for example "They unsubscribed.", "The email address isn't valid.", "Earlier mail to this address bounced, so it wasn't sent again.", "Your store reached today's sending limit.", or "Your store's postal address was missing."

## Questions
